Arduino Uno
-
- Posts: 118
- Joined: Sun Apr 03, 2016 6:42 am
- Location: Michigan
Arduino Uno
this is what I am currently starting to work with. It is a Microcontroller that can run Windows, Linux, or Mac OS X. It can be programmed to do anything that you want it to do as it has a blank processor to be programmed to however you want, and it is all quite easy. I will post progress with some of the things that I make it do, as I begin to use it more.
- Attachments
-
- This is all the electronic parts and connecters that you get for around $100 at a RadioShack
- IMG_0375.JPG (44.33 KiB) Viewed 2067 times
-
- This is it again
- IMG_0372.JPG (36.45 KiB) Viewed 2068 times
-
- This is the Arduino Uno MicroController
- IMG_0371.JPG (34.3 KiB) Viewed 2068 times
-
- Posts: 118
- Joined: Sun Apr 03, 2016 6:42 am
- Location: Michigan
Re: Arduino Uno
No, that's just where I got this at lol. I am sure that you can purchase it other places for less money but I decided to get it there.
Re: Arduino Uno
Hey at least hes supporting the dieing brand. Give the guy a break will ya lol xD
Thanks!
Owner
Thanks!
Owner
- {LS}RePublic
- Posts: 538
- Joined: Fri Apr 04, 2014 5:04 am
Re: Arduino Uno
I guess Radioshack would be similar to our Jaycar. Except people do actrually shop at jaycar =p
Though Jaycar is known for their high priced China goods. They could easily support locals... but they choose profit over quality.
On another note It seems Tandy Electronics bought out Radioshack. But then Tandy was bought out by Woolworths... that owned Dick Smith Electronics, so they converted all the Tandy stores to Dick Smiths.
But now Dick Smith Electronics is closing down Australia Wide though being present in almost every city.
Times are getting shaky.
Though Jaycar is known for their high priced China goods. They could easily support locals... but they choose profit over quality.
On another note It seems Tandy Electronics bought out Radioshack. But then Tandy was bought out by Woolworths... that owned Dick Smith Electronics, so they converted all the Tandy stores to Dick Smiths.
But now Dick Smith Electronics is closing down Australia Wide though being present in almost every city.
Times are getting shaky.
Re: Arduino Uno
You can get them for half that. I got an arduino uno and a nano with a whole bunch of other misc components for around 60.
A lot of those components were free.99 from school though also
http://www.amazon.com/s/ref=nb_sb_noss_ ... er+arduino
A lot of those components were free.99 from school though also
http://www.amazon.com/s/ref=nb_sb_noss_ ... er+arduino
Re: Arduino Uno
I posted this on the LM forum:
I've been messing with one of these for $35:
https://www.raspberrypi.org
Specs:
• A 1.2GHz 64-bit quad-core ARMv8 CPU
• 802.11n Wireless LAN
• Bluetooth 4.1
• Bluetooth Low Energy (BLE)
• 4 USB ports
• 40 GPIO pins
• Full HDMI port
• Ethernet port
• Combined 3.5mm audio jack and composite video
• Camera interface (CSI)
• Display interface (DSI)
• Micro SD card slot (now push-pull rather than push-push)
• VideoCore IV 3D graphics core
There are many, many projects you can do with one of these. I'm currently working on one to control a homemade built sprinkler system and one to monitor my internet connection, in which if something happens like drops speed, or drops all together, it will either auto tweet my ISP or open a ticket with them for them to start looking into the issue. For speed drops, that's just going to be my way of bothering the HELL out of them till they remedy the issue.
I've been messing with one of these for $35:
https://www.raspberrypi.org
Specs:
• A 1.2GHz 64-bit quad-core ARMv8 CPU
• 802.11n Wireless LAN
• Bluetooth 4.1
• Bluetooth Low Energy (BLE)
• 4 USB ports
• 40 GPIO pins
• Full HDMI port
• Ethernet port
• Combined 3.5mm audio jack and composite video
• Camera interface (CSI)
• Display interface (DSI)
• Micro SD card slot (now push-pull rather than push-push)
• VideoCore IV 3D graphics core
There are many, many projects you can do with one of these. I'm currently working on one to control a homemade built sprinkler system and one to monitor my internet connection, in which if something happens like drops speed, or drops all together, it will either auto tweet my ISP or open a ticket with them for them to start looking into the issue. For speed drops, that's just going to be my way of bothering the HELL out of them till they remedy the issue.
Re: Arduino Uno
Clever idea Killroy.
-
- Posts: 118
- Joined: Sun Apr 03, 2016 6:42 am
- Location: Michigan
Re: Arduino Uno
This is all awesome stuff and really what I was hoping for. I have just done some simple programming with an LED for my first try and its going well. I have big plans and as I go farther I will send some more stuff your way.
Re: Arduino Uno
Yes, please do, keep us up to date. So far as for mine, they are both working well. My ISP is AT&T and it's only tweeted them once during an electrical storm outage. I run solar panels and batteries also for back-ups. AT&T is also a Local Exchange Carrier (LEC) that my company provides to. My setup contacts a specific group with them in the local NOC here where I live. When they get a contact from my setup, their team immediately calls me directly to my cell phone to find out the current situation, due to myself having to also work from home most of the time. So they take care of me, and I try to take care of them by keeping their providing services for the consumer upThe Boloblur wrote:This is all awesome stuff and really what I was hoping for. I have just done some simple programming with an LED for my first try and its going well. I have big plans and as I go farther I will send some more stuff your way.
As for the one that acts as a timer for my sprinkler system, it's working pretty well in keeping my 8 1/2 acres saturated. I can also control it via my cell phone if away from the homestead, and see it performing if needed with the security camera setup, also via the cell phone.